Hiring a Plumber for Dishwasher Installation: Why It's a Good Idea

Source This Article

 

 

Presented here down the page you can locate a lot of very good answers around How to install a dishwasher safely.


How to install a dishwasher safely
From carrying a dishwasher into your residence to attaching the water connections, mounting a dishwashing machine can take up to five hours. It might take also longer if you do not have the right tools. To make your life much easier as well as to stay clear of setting up a dishwashing machine improperly, we suggest hiring a professional plumber. A plumber will certainly have the right tools available and can install your brand-new dish washer in under 2 hrs. If you're not quite persuaded yet, keep reviewing to find out why you ought to work with a plumber.

 

A Plumber Can Inspect the Supply Lines


A supply line, particularly a dishwasher adapter, links the dishwasher to a water resource. A plumber can ensure that the line is compatible with both your dish washer and water resource if you buy a new supply line. If you decide to make use of an existing supply line, an expert plumber can examine it to make sure that it's in good condition and also does not have any leakages.

 

An Improper Installation Can Nullify the Dishwasher's Guarantee


Before mounting a dish washer on your own, you ought to review the service warranty meticulously. Unless you are handy and have experience setting up dishwashers, you should hire a plumber so you do not risk your warranty.

 

Installing a Dishwasher Requires a Selection of Devices


You may need to make a journey to Lowe's or Residence Depot if you do not have a selection of devices on hand. To set up a dishwasher, you require the adhering to tools: pliers, an adjustable wrench, a collection of screwdrivers, a tube cutter, and also hole saws. You will likewise need cleansing materials such as a superficial pail and sponge. The expense to purchase them can include up swiftly if you do not have any of these items.

 

Not Mounting Your Dishwasher Appropriately Can Cause a Mountain of Troubles


Not only can mounting a dishwasher properly nullify your guarantee, yet it can additionally create a mess. If you incorrectly install your dishwashing machine to the rubbish disposal, you may see poignant smells or have deposit on your recipes.

 

A Plumber Can End Up the Job Affordably as well as Swiftly


You do not intend to get stuck washing your recipes by hand. A plumber can mount your dish washer in one to 2 hrs. Additionally, the ordinary plumber won't bill greater than a number of hundred bucks to install your dishwasher. Why risk your warranty as well as possibly have to buy a new dishwasher? Take the secure and also easy path by employing a plumber.
From transporting a dish washer right into your residence to affixing the water connections, mounting a dishwasher can take up to five hrs. To make your life less complicated and to avoid setting up a dishwashing machine inaccurately, we advise working with a specialist plumber. A plumber will certainly have the right devices on hand as well as can mount your new dish washer in under two hrs. A supply line, especially a dishwasher adapter, connects the dishwashing machine to a water source. Unless you are useful and have experience installing dish washers, you should employ a plumber so you don't risk your guarantee.

 

How To Install A Dishwasher

 

Installing A Dishwasher Yourself

 

Just like other home appliances, a dishwasher helps to make chores less time-consuming and free of hassle. Most modern kitchens have a dishwasher or a cabinet space for dishwasher installation built into them. An older kitchen with no dishwasher or cabinet space for one might require a little reconstruction to accommodate dishwasher installation.


Installing a dishwasher requires basic knowledge of plumbing and electrical wiring. This article contains the steps involved in dishwasher installation, dishwasher installation tips, things to consider when installing a dishwasher in a kitchen that previously had no dishwasher in it, and tips for maintaining a dishwasher.

 

Steps Involved In Dishwasher Installation

 

Step One: Gather the Necessary Supplies

 

Gather all the required items and keep them near the installation site for easy reach. The materials and tools you will require include the following:

 
  • A screwdriver


  •  
  • • A hose clamp


  •  
  • • Duct tape (optional)


  •  
  • • A brass fitting


  •  
  • • Teflon tape


  •  
  • • A pair of pliers


  •  
  • • An adjustable wrench


  •  
  • • A drill


  •  
  • • Braided steel water line


  •  
  • • A pair of rubber hand gloves (optional)


  •  
  • • Wire nuts

  •  

Step Two: Take Safety Measures

 

First, turn off the power socket and unplug the power cord if it is a plug-in dishwasher. Then, proceed to turn off the circuit breaker. Next, turn off the hot water shut-off valve under the kitchen sink and run the tap to ensure the water supply is shut off. Protect your kitchen floor close to the installation area with an old rug or a piece of drop cloth.

 

Step Three: Remove the Old Dishwasher

 

This step only applies if your kitchen has an old dishwasher that you want to replace. Remove the cabinet door to gain complete access to the old dishwasher. Next, remove the cover of the access panel located at the bottom front side of the dishwasher. Locate the junction box inside the access panel.


Now, unscrew the terminal screws holding the wires in place at the junction box. Then, remove and tuck the wires out of the way with duct tape. Locate the dishwasher water inlet tube, undo the brass fitting and disconnect the water supply pipe from it. Put the disconnected end of the water supply line pipe into a bucket or bowl to collect any water remaining in it.


Reach down beneath the sink to undo the drain hose. Loosen, then clamp and disconnect the drain hose of the dishwasher from the tailpiece of the sink. Next, put the disconnected end of the drain hose into a bucket to collect the water and debris.


With all the connections out of place, remove the screws holding the dishwasher in place with a screwdriver, gently pull the dishwasher out from the cabinet and set it aside. You can use a piece of cloth or towel to clean up the mess made or any water spillage on the floor. Also, clean the cabinet where the old dishwasher was before installing a new one.


Skip this step if you are having a dishwasher installed for the first time in your kitchen.

 

Step Four: Install the New Dishwasher

 

Connect the Water Supply

 

Wrap Teflon tape on the tip of the water inlet pipe located at the bottom of the dishwasher. Screw on the 90 degrees brass fitting to the taped inlet pipe and tighten it with an adjustable wrench. Most dishwasher units do not include a brass fitting, but they are available at hardware stores.


Once you have the fitting, connect the new water supply line to the elbow of the brass fitting. Pass the other end of the waterline through one of the cabinet holes and place it on the floor beneath the kitchen sink.

 

Attach the Drain Line

 

Locate the dishwasher drain standout pipe, connect the drain line to the dishwasher, and secure the connection with a hose clamp. Pass the other end of the drain line through the cabinet hole and place it towards the sink drain tailpiece

 

Slide the Dishwasher into Place

 

Attach the adjustable legs to the front of the dishwasher. Carefully slide the dishwasher under the countertop into the cabinet. Stop halfway and ensure everything is in a good position before sliding it in completely. Finish hooking up the water line by connecting the other end to the dual shut-off valve located under the kitchen sink.


Proceed to connect the drain hose through an air gap to your garbage disposer, if you have any, or to the drain tailpiece of your sink. If you do not have an air gap, make a high loop with the drain hose before connecting it to the garbage disposal or the sink drain tailpiece.

https://www.movementplumbing.com/blog/how-to-install-a-dishwasher


Should You Install Your Own Dishwasher?

 

We had been made aware of that article on How to install a dishwasher safely through an acquaintance on a different site. Don't hesitate to take the time to promote this article if you enjoyed it. Thanks a lot for your time. Come back soon.



Need Help? Hire Us Now!

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Hiring a Plumber for Dishwasher Installation: Why It's a Good Idea”

Leave a Reply

Gravatar